VIDEO
The Hydraulic Roller Power Feed Feature Will Force Feed Material Into The Cutting Chamber & Includes 'Automatic Speed Sensing Feed Rate Speed Adjustment' For Maximum Performance Efficiency!
Also, Instead of a Bottom Roller (which Supplements the Top Power Roller), This Terex Chipper Uses A 'Cleated Conveyor', Providing a More Robust Feed While Minimizing the Need to Contact the Rear Rollers with Material Being Fed, Accommodating the Chipping of a Much Wider Range of Vegetation!
This Chipper is Also Hydraulically Self-Contained, and Does Not Require Hydraulic Outlet Power From The Tractor!
Chipper has 4, Hardened Tool Steel, Presharpened Rotor Blades and 1 Anvil Blade.
Hour Meter is Standard!
Multi-Pin Tractor Style Electrical Connector is Standard.
Videos of Other Chippers Always Show Chipping of Straight Limbs & Branches - But Click on the Above Link to See the Aggressive & Robust Feeding & Chipping Action of This Machine with Very Crooked & Serpentine Shaped Limbs & Branches - This Universal & Dynamic Feeding System is Unsurpassed!
Powder Coated Paint!
Chipper Includes:
540RPM, Shearbolt Protected PTO Shaft.
Hydraulic Controls & Hoses.
Safety Shut-Off Bar with Forward & Reverse Functions.
Clear Hopper Opening Apron For Safety & Visibility.
Recommended for 35 to 100HP Tractors.
This Terex Chipper Will Chip Up To 7" Diameter Material: All Soft & Hardwood Trees, Bamboo, Palm Fronds, Vines, Yucca, Etc!
PTO Power Transfers to the Flywheel via a Belt Drive System to Provide 1000RPM's of Aggressive Flywheel Rotation!
3-Point Hitch is Cat 1 & 2, Clevis Style!
Overall Dimensions w/Hopper Folded are 65"L x 43"W x 100"H.
Throat Opening is 9-1/2" Wide x 17" Tall.
Hinged Feed Table Length is 33-1/2" x 36" Wide.
Stationary Feed Table Section, Between Hinge & Throat Opening is 25-1/2".
Feed Table is 24" Above Grade in Open Position.
Feed Hopper Opening is 34" X 34".
Rotor Dimensions are 1-3/16" Thick x 24-1/2" Diameter & Weighs 197lb's.
Discharge Chute Rotates 360 Degrees Continuously.
Weight: 1,166lb's (Less PTO Shaft, Pallet/Crating, etc.).
Specifications are based on manufacturer provided data & subject to change.