TB100 Drum Type Wood Chipper:
Self-Feed, 4"Dia x 12"Wide Throat
Suitable for 18-50HP

Peruzzo TB100 Drum Type Wood Chipper


Availability: Usually Ships in 1 to 2 Weeks
Product Code: TB100

General Features:

  • Drum Type Chippers Offer Superior Performance & Results & Less Maintenance Than Rotor/Disc Style Chippers.
    • Watch the Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as they Pass Thru the Hopper, The Stable Condition of the Chipper Itself & Smaller, Uniform Size of the Chips.
      • Unlike the Rotor/Disc Style Chippers, This Peruzzo Drum Chipper Does Not Allow Violent Movement of Limbs & Branches During The Intake/Feeding Process, which creates a Potential for Head Knockers, Eye Pokers, etc - A Tremendous Safety Issue!
      • Also Unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing Around, Which Leads to Premature Wear & Tear on the Chipper & also Introduces Another Safety Hazard.
  • With the 4" Tall x 12" Ultra-Wide Throat Opening Enabling the Worst, Most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is Reduced, and Clogging is Minimized.
    • This Large Throat Opening Accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
  • A 12" Wide Throat is the Widest Throat Opening Available for 4" Chippers. In Fact, Typically, you'd have to get a 7" Chipper for a 12" Wide Throat Opening.
  • Chipper has 2 Double Sided, Hardened Tool Steel, Presharpened Drum Blades.
  • Powder Coated Paint!
  • Chipper is Shown Mounted on a Tractor for reference only - Tractor is Not Included.
  • Chipper Ships Assembled & Includes a Shear Bolt Protected 540RPM PTO Shaft.
  • Suitable For Category 1, 3-Point Hitches.
  • Recommended Tractor HP Range is 18 to 50HP.
  • 4" Tall x 12" Wide Throat Opening.
  • The Chipper Drum with 2 Embedded Blades Provides The Best Self-Feeding Chipper On The Market!
    • Double Sided Drum Blades Reduces Time Required Between Sharpening's.
  • Drum is 6" X 12" Wide.
  • Hopper is 18" Tall x 20" Wide x 42" Deep (to Blades).
  • With Chipper on the Ground, it's 27" to Bottom of Hopper Feed Shelf.
  • As Shown in Photo, it's 51" from Grade to the Tip of Deflector.
  • Weight: 413lb's (Less PTO Shaft, Pallet/Crating, etc.).
  • Specifications are based on manufacturer provided data & subject to change.

Share your knowledge of this product. Be the first to write a review »