Home > ALL PRODUCTS >

SUPER MOTOFOX 1200 48" ATV, UTV PULL BEHIND FLAIL MOWER: PULL START, 16HP V-TWIN CYLINDER VANGUARD ENGINE!
Peruzzo Super Motofox 1200, 48" Pull Type Flail Mower


 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: PERUZZOSUPERMOTOFOX1200
 

Description
 

GENERAL FEATURES:
  • All the various Tongue positions makes this a very versatile Mower!
  • Mower Hitch Positioning:
    • Infinite positioning of the Tongue across the width of the front Tool Bar:
      • Three common positions are: Fully Left, Fully Right, or Center Mounted, and of course, anywhere else in horizontal travel.
      • Plus, in any of those horizontal Tool Bar positions, the Tongue can be adjusted to 3 other horizontal positions:
        • Left Angle, Center, Right Angle.
      • Obvious Uses:
        • For those w/o a Tractor & Mower, pull this Mower with an ATV, UTV, Pick-Up, etc.
        • Use the Offset Position to get up next to Ponds, Structures, Tree Lines, under Tree Canopies, etc!
      • Unconventional Use: Pull this with your Riding Mower, Zero Turn, etc, and add 4' of Mowing Width to each Trip!
  • Rear Center Handle is for Manual Cutting Height Adjustment using the Rear Roller, and for Positioning the Tires for Transport Mode:
    • Mower Deck is Suspended on Rear Roller during Mowing.
    • Tires are used for Transport Mode only!
  • Sample Photo shows Mower attached to an ATV for reference only - ATV is Not included.
  • Sample Video is of the 13HP MotoFox 1200, but this Listing is for the Center Mounted, 16HP V-Twin Super Motofox 1200!
    • More Photos coming Soon!
SPECIFICATIONS:
  • Vanguard Twin Cylinder, OHV, 16HP Gas Engine:
    • Recoil, Pull Rope Starter.
    • Centrifugal Clutch.
    • Quiet Muffler w/Spark Arrestor & Deflector.
    • Vanguard Engine is Made in Japan.
  • Mowing width is 48".
  • Overall width is 73".
  • Electronically Balanced Rotor has 80 'Y' Style Blades.
    • Rotor & Blades are Rated to Cut up to 1.5" Diameter Material.
  • 1-7/8" Ball Hitch Tongue.
  • Weighs 540lb's.
  • Cutting Height Adjusts from 3/4" to 3-1/4".
  • Pneumatic Tires provide Shock Absorption in Transport.
  • Suitability of Vanguard Engine for use in California must be determined by Customer!
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Share your knowledge of this product. Be the first to write a review »