Bull 2200 87" Flail Mower & Side Cutter:
Center Mounted with 24" Offset
Suitable for 70-100HP

Peruzzo Bull 2200 87" Flail Mower w/Side Cutter


Availability: Usually Ships in 1 to 2 Weeks

General Features:

  • This Peruzzo Flail Mower Has 20 Forged & Hardened Steel Hammer Blades - Peruzzo Flail Mowers always have the Highest Population of Blades to Provide the Best Possible Cut, and to Reduce the Burden on your Tractor!
  • Peruzzo Mower Gearboxes include an Over-Running Clutch, which provides two advantages:
    • First, easy alignment & attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
      • The O.R. Clutch enables you to freely spin the PTO Shaft & Gearbox for alignment!
    • Second, Smooth Shut Down:
      • The O.R. Clutch allows the Mower Gearbox to free wheel to a stop, eliminating abrupt shutdowns & wear of the PTO Brake!
  • Rear Roller Provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-5").
  • Under Deck, Mulching Counter Blade ensures reduction of Larger Clippings & further reduces the Smaller Ones.
  • Hydraulically Offsets 12" Right or Left from Center - 24" Total Travel!
  • Multiple Advantages of this Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
    • If you are Mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor alongside of the Fence or Building (and risk scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), you can simply keep the Offset part of the Mower close to the edges you want to mow and prevent any damage to the Tractor or the trees, fencing, walls, etc. Snagging posts, trees or other secured objects can also damage the 3-Point linkage on the Mower or even the pull arms & top link of your Tractor.
    • Much Better Visibility: If the edge of any Mower is flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the Offset feature will provide that. It will also eliminate the need to look back over your shoulder to see the Mower Deck. A simple glance to your right gives you visibility of the outer mowing edge.
  • Peruzzo Flail Mowers Provide a Much Better Cut than Standard Rotary Mowers, plus with the 'Forged & Hardened' Hammer Blades on this Flail Mower, you can Cut 4" Diameter Material & Get a Very Good Finish Cut too!
  • Peruzzo Flail Mowers Are The Safest & Most Efficient Mowers Available:
    • With Peruzzo Flail Mowers, the possibility of discharging Dangerous Projectiles is dramatically reduced compared to Conventional Rotary Mowers, and with the reduced Deck Depth & Weight, they're the easiest for you & your Tractor to handle! Plus, the Superior 'Single-Pass' Cut of Peruzzo Flail Mowers provides New Efficiencies by Eliminating Multiple Passes for Excellent Results!
  • Powder Coated Paint!
  • Tractor shown in Sample Image is for Reference only & Not Included.
  • Mower Includes 540RPM PTO Shaft.
  • The Peruzzo Side Trim Mower has 2 Solid Steel Swinging Blades (attached to a pan carrier) to provide the Best Possible Cut!
    • Blades are 5/15" thick x 3-1/8" wide x 8-3/4" long.
    • Blades are Sharpenable & Always in Stock.
  • Rotary Head is Extended in photo.
    • Outside edge/max reach of the Trimmer Head from edge of Flail Mower Deck is about 24".
    • Trimmer Rotary Head has a protective bumper around the circumference to protect Trees, Posts, etc.
      • For additional protection, the Head will also rotate (upon contact) to prevent damage to the Head & Fixed Objects it contacts.
    • Rotary Head can be pitched about 50° left or right (on horizontal axis) to accommodate varied Terrain.
    • Side Trim Mower requires 1 Set of Tractor Hydraulic Outlets for Operation.
  • Side Trim Mower Ships with Attaching Brackets, Hydraulic Hoses & Couplers.
  • Rated for 70 to 100HP Tractors.
  • Suitable for Cat 2, 3-Point Hitches.
  • Mowing Width: 87".
  • Overall Width: 93".
  • Overall Depth: 44".
  • Electronically Balanced Rotor has 20, Forged & Hardened Steel Hammer Blades.
    • Rotor & Blades Rated to Cut 4"-5" Diameter Material.
    • Heavy Duty Hammer Blades weigh 3.5lb's each!
  • Weight: 1,507lb's (Less PTO Shaft, Pallet/Crating, etc.).
  • Specifications are based on manufacturer provided data & subject to change.
  • Mowing Width: 31".
  • Mower Head Speed: 2400RPM's.
  • Rotor & Blades Rated to Cut 2" Diameter Material.
  • Specifications are based on manufacturer provided data & subject to change.

Share your knowledge of this product. Be the first to write a review »