Home > ALL PRODUCTS >

TB100 3-POINT DRUM TYPE WOOD CHIPPER: CHIP 4"DIAx12" WIDE: DYNAMIC SELF FEED IS EXCELLENT FOR PALM FRONDS!
Peruzzo TB100 Drum Type Wood Chipper


 


Availability: Temp backordered - though we are taking Advance Orders!
Product Code: TB100
 

Description
 

GENERAL FEATURES:
  • Drum Type Chippers Offer Superior Performance & Results, and Less Maintenance Than Rotor/Disc Style Chippers.
    • Watch the Embedded Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as they Pass Thru the Hopper, The Stable Condition of the Chipper Itself, and the Smaller & Uniform Size of the Chips.
      • Unlike the Rotor/Disc Style Chippers, This Peruzzo Drum Chipper Does Not Allow Violent Movement of Limbs & Branches During The Intake/Feeding Process, which creates a Potential for Head Knockers, Eye Pokers, etc - A Tremendous Safety Issue!
      • Also Unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing Around, Which Leads to Premature Wear & Tear on the Chipper, and also Introduces Another Safety Hazard.
  • With the 4" Tall x 12" Ultra-Wide Hopper Opening Enabling the Worst, Most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is Reduced, and Clogging is Minimized.
    • This Large Throat Opening Accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
  • A 12" Wide Hopper is the Widest Throat Opening Available for 4" Chipper. In Fact, Typically, you'd have to get up to a 7" Chipper to get a 12" Wide Throat Opening.
  • Chipper has 2 Double Sided, Hardened Tool Steel, Presharpened Drum Blades.
  • Chipper is Shown Mounted on a Tractor for reference only - Tractor is Not Included.
  • Chipper Ships Assembled, and Includes a Shear Bolt Protected 540RPM PTO Shaft.
SPECIFICATIONS:
  • Suitable For Category 1, 3-Point Hitches.
  • Recommended Tractor HP Range is 18 to 50HP.
  • 4" Tall x 12" Wide Throat Opening.
  • The Chipper Drum with 2 Embedded Blades Provides The Best Self-Feeding Chipper On The Market!
    • Double Sided Drum Blades Reduces Time Required Between Sharpening's.
  • Drum is 6" X 12" Wide.
  • Hopper is 18" Tall x 20" Wide x 42" Deep to Blades.
  • With Chipper on the Ground, it's 27" to Bottom of Hopper Feed Shelf.
  • Weight is 396lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Share your knowledge of this product. Be the first to write a review »