Home > WOOD CHIPPERS >

TEREX 3-POINT, PTO, CONVEYOR POWER FEED, SELF-CONTAINED, SPEED SENSOR WOOD CHIPPER: CHIPS 7"!
Peruzzo 7" Terex, 3PT Wood Chipper


 


Availability: Usually Ships in 2-6 Weeks
Product Code: TC15
 

Description
 

GENERAL FEATURES:

  • The Hydraulic Roller Power Feed Feature Will Force Feed Material Into The Cutting Chamber & Includes 'Automatic Speed Sensing Feed Rate Speed Adjustment' For Maximum Performance Efficiency!
    • Also, Instead of a Bottom Roller (which Supplements the Top Power Roller), This Terex Chipper Uses A 'Cleated Conveyor', Providing a More Robust Feed While Minimizing the Need to Contact the Rear Rollers with Material Being Fed, Accommodating the Chipping of a Much Wider Range of Vegetation!
  • This Chipper is Also Hydraulically Self-Contained, and Does Not Require Hydraulic Outlet Power From The Tractor!
  • Chipper has 4, Hardened Tool Steel, Presharpened Rotor Blades and 1 Anvil Blade.
  • Hour Meter is Standard!
  • Multi-Pin Tractor Style Electrical Connector is Standard.
  • Videos of Other Chippers Always Show Chipping of Straight Limbs & Branches - But Click on the Above Link to See the Aggressive & Robust Feeding & Chipping Action of This Machine with Very Crooked & Serpentine Shaped Limbs & Branches - This Universal & Dynamic Feeding System is Unsurpassed!
  • Chipper Ships Complete Including:
    • 540RPM, Shearbolt Protected PTO Shaft.
    • Hydraulic Controls & Hoses.
    • Safety Shut-Off Bar with Forward & Reverse Functions.
    • Clear Hopper Opening Apron For Safety & Visibility.
SPECIFICATIONS:
  • Recommended Tractor HP is 35 to 100.
  • This Terex Chipper Will Chip Up To 7" Diameter Material: All Soft & Hardwood Trees, Bamboo, Palm Fronds, Vines, Yucca, Etc!
  • PTO Power Transfers to the Flywheel via a Belt Drive System to Provide 1000RPM's of Aggressive Flywheel Rotation!
  • 3-Point Hitch is Cat 1 & 2, Clevis Style!
    • Bushings Required for Cat 2 Applications.
  • Overall Dimensions w/Hopper Folded are 65"L x 43"W x 100"H.
    • 100" Height is to Top of Discharge Deflector as Shown in Photos.
  • Throat Opening is 9-1/2" Wide x 17" Tall.
    • Cleated Conveyor Width is 9-1/2" & Extends 9" In Front Of Top Roller.
    • Cleated Roller is 8" Diameter.
  • Hinged Feed Table Length is 33-1/2" x 36" Wide.
    • Stationary Feed Table Section, Between Hinge & Throat Opening is 25-1/2".
    • Feed Table is 24" Above Grade in Open Position.
  • Feed Hopper Opening is 34" X 34".
  • Rotor Dimensions are 1-3/16" Thick x 24-1/2" Diameter & Weighs 197lb's.
  • Discharge Chute Rotates 360 Degrees Continuously.
    • Discharge Chute is Complimented with an Adjustable Deflector Tip.
  • Weight is 1166lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Share your knowledge of this product. Be the first to write a review »