Home > PULL BEHIND, FLEX WING FLAIL MOWERS >

PRO 5000 TRI-FLEX, TRI-DECK FLAIL MOWER 16'-5" FLOAT OSCILLATION, 65-150HP: CONVERTIBLE TO DETHATCHER W/'Y' OR HAMMER BLADES!
Peruzzo 16'-5" Tri-Flex Flail Mower


 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: PERUZZO5000_D
 

Description
 
Above Video is of Tri-Deck with Larger Hammer Blades. New Video with Smaller Hammer Blades & 'Y' Blades Coming Soon!


GENERAL FEATURES:
  • This Peruzzo Flail Mower is Available with 'One' of Two Types of Blades:
    • 164 Solid Cast Steel Hammer Blades, or:
    • 328 4mm, Double Sided 'Y' Blades.
      • Peruzzo Flail Mowers always have the highest population of Blades to provide the best possible cut, and to reduce the burden on your Tractor!
      • Optional Hardox Verticut Blades are Compatible only with 'Y' Blades.
      • Set of 164 Hardox Dethatching Blades Cost $1150.00.
  • Peruzzo Mower Gearboxes include an over-running clutch, which provides two advantages:
    • First, easy alignment & attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
      • The O.R. Clutch enables you to freely spin the PTO Shaft & gearbox for alignment!
    • Second, smooth shut down:
      • The O.R. Clutch allows the mower gearbox to free wheel to a stop, eliminating abrupt shutdowns!
  • To assist in 'front to rear' Deck leveling, each deck includes a built in level gauge, and the frame itself also includes a level gauge.
  • Mower includes a spool valve with float positioning (for tractors w/o float positioning hydraulic outlets).
    • Float positioning also prevents raising the outer decks while the PTO is engaged (which would damage the PTO u-joints).
  • All 3 hydraulic cylinders are a double acting, which allows superior control (over single acting cyl's), and also allows for down pressure on the decks.
  • Terrain Scalping is eliminated with the Rear Rollers, Gauge Wheels & Adjustable Rear Transport Axle.
    • Rear Roller (on each deck) provides Mower Deck suspension & cutting height adjustment.
    • Complimenting the center rear deck roller, the transport axle (& tires) provide Deck suspension, cutting height adjustment & overall vertical positioning for the Mower.
    • Front Gauge Wheels on the left & right Decks provide Deck suspension & cutting height adjustment.
      • Optional Gauge Wheels Available for $499.00/Pair.
      • Sample Photo shows Optional Front Gauge Wheels for Reference only.
  • This Flail Mower is the safest Mower available:
    • Because of the limited depth of this Tri-Deck Flail Mower, it is much easier to tow, and much more stable than a rotary batwing mower, whether the wings are up in the transport position, or down in the mowing position!
    • If you are mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor along side of the fence or building (and risk scraping your tractor tires or snagging & damaging trees, posts, fencing, buildings, etc)., you can simply keep the outer edge of this Mower close to the edges you want to mow and prevent any damage to the Tractor or the trees, fencing, walls, etc. Snagging posts, trees or other secured objects will damage the Mower, likely the tractor too, and possibly cause fatal accidents.
    • If the outer edge of any Mower is only flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the extended/outer left & right Decks will provide that. It will also eliminate the need to look over your shoulder to see the Mower Deck. A simple glance to your left or right, gives you visibility of the outer mowing edge.
  • Flail Mowers provide a better cut than standard rotary mowers, plus with the Universal 'Solid Cast Hammer' Blades on this Flail Mower, you can cut up to 1.5" diameter material, and get a very good finish cut too. To get the best finish cut, the Hammer Blades must be as sharp as possible, which can be done with an angle grinder. To get the maximum cutting capacity of 1.5", your tractor HP will need to be close to the maximum HP requirement.
  • Flail Mowers are the safest Mowers available:
    • The possibility of discharging dangerous projectiles is reduced dramatically!
    • Flail Mowers also are the easiest to handle on your Tractors 3-point. The much shorter length of the Mower Deck (compared to rotary mowers) significantly reduces the physical burden on your Tractor & 3-point, making mowing, handling, transport & storage much more stable & safer for any size Tractor, especially for compact & utility size Tractors!
  • Requires 1 set of hydraulic outlets.
  • Tractor shown in photo is for display purposes only, and not included!
  • Mower ships complete including 1000RPM PTO Shaft, Hydraulic Hoses & Tips!
SPECIFICATIONS:
  • Rated for 65HP to 150HP Tractors with 21 Spline, 1000RPM Output Shaft.
    • Use on 65 to 75PTO HP Tractors will be limited to light grooming, finish mowing type of applications.
    • Gearbox Converter for 540RPM Output Shafts available for $999.00.
  • Can be configured for 540RPM or (21 spline) 1000RPM applications.
  • Drawbar connected pull type hitch.
  • Mowing width is 16'-5".
  • Overall width is 19'-8".
  • Overall depth is about 12'.
  • Electronically balanced Rotor has 164, solid Cast Steel Hammer Blades, or 328 'Y' Blades.
    • Rotor & Blades are rated to cut up to 1.75" diameter material with Hammer Blades.
      • Cutting Capacity with 'Y' Blades is up to 1.25".
    • Cutting Height:
      • With Hammer Blades, Min 0.59" to Max 3.14".
      • With 'Y' Blades, Min 1.35" to Max 4".
  • Weighs 3968lb's.
  • Specifications are based on manufacturer provided data & subject to change.

Share your knowledge of this product. Be the first to write a review »