Home > ALL PRODUCTS >

PANTHER 2000 FLAIL COLLECTION MOWER: 79" CUT, 74 CU' CAPACITY, GROUND DISCHARGE: BEST QUALITY, PARTS SUPPORT & TECHNICAL SUPPORT!
Peruzzo Panther 2000 3-Pt Flail Collection Mower


 


Availability: Usually Ships in 1-4 Weeks
Product Code: PERUZZO2000
 

Description
 



GENERAL FEATURES:
  • The Peruzzo Series of Collection Flail Mowers provide the superior cut & performance expected with a Flail Mower, as well as the option of accumulating/collecting the clippings!
  • The Collector Hopper opens hydraulically for 'Hands & Labor Free' dumping of collected material, for reuse as organic weed control, compost or mulch, for livestock feed, or even for disposal.
  • This Peruzzo Collection Flail Mower has 64 'Solid Cast Steel' Hammer Blades - Peruzzo Flail Mowers always have the highest population of Blades to provide the best possible cut, and to reduce the burden on your tractor!
    • Optional Blades available are as follows:
      • Hardox Verticut Dethatching Blades:
        • Compatible w/Formed Steel Hammer Blades.
      • 'Y' Flail Blades:
        • Compatible w/Hardox Verticut Dethatching Blades.
  • Gage Wheels are included as shown in photo.
  • Sample Photo shows the Panther w/Optional Hyd High Dump, but this Listing is for the Standard 2000 w/Ground Discharge - actual Photo coming soon!
    • 1st Video is a Koala 1200 Mower, but this Listing is for a Panther 2000.
    • 2nd Video is a Elephant 2000 Mower, but this Listing is for a Panther 2000.
  • Mower ships complete including a 540RPM PTO Shaft!
SPECIFICATIONS:
  • Rated for 60 to 80HP Tractors.
    • Tractor counter-weight ballasting is very important on smaller, lighter tractors.
  • Suitable for Cat 2, 3-Point Hitches.
  • Hopper capacity is 74cu'/2.75cu yards.
  • Working width is 79".
  • Overall width is 84".
  • Overall length is 67".
  • Overall height is 57".
  • Cutting height can be set from +/-3/4" below grade to +/-4" above grade.
  • Electronically balanced Rotor has 64 Solid Cast Steel Hammer Blades.
    • Rotor & solid, cast Hammer Blades are rated to cut 1" to 2" diameter, depending on material.
  • Weight is 1507lb's.
  • Specifications are based on manufacturer provided data & subject to change.

Share your knowledge of this product. Be the first to write a review »