Home > ALL PRODUCTS >

Cobra Biomass Flail Collection Mower:
64cu' Cap, Hyd High Dump
Suitable for 70-100HP

Peruzzo Cobra 1600 60" Biomass Flail Mulcher


 


Availability: Usually Ships in 4-8 Weeks
Product Code: COBRA1600
 

Description
 
GENERAL FEATURES:
  • Complimenting the Efficiency of Dropping Prunings in Orchard & Vineyard Aisles, this Pruning Shredder, with it's Unique Pick-Up & Shredding Rollers reduces Prunings to Uniform Pieces (1" to 2" in length) to be used for BioMass Energy Production, Palletizing, Livestock Bedding, Mulching, etc.:
    • For Wood Burning Boilers, Stoves, etc., Smaller Pieces like these always Provide Unparalleled Energy Rates.
    • These Smaller Dimensions are Suitable for most all Conveying Methods, as well as Bedding for Livestock.
    • Reduced Shredded Prunings also make Excellent Mulch for Landscaping & Composting.
  • With 2" Diameter Prunings, expect to Maintain an average Ground Speed of 2 to 3MPH.
  • Average Production Rate is 1.5 to 2 Tons/Hour.
  • 3-Point Mounted Drawbar Hitch Provides the Best Turning Radius in Tight Aisle Ways & also enables the use of the 3-Point for additional Raise/Lower control. It also eliminates centralized Tongue Weight, distributing it evenly across the 3-Point for a more Stable Suspension of Weight, and accommodates the use of Smaller Tractors.
  • Requires Two Hydraulic Circuits:
    • One for Lift Function.
    • One for Front to Rear Tilt/Leveling.
  • Hopper Lift & Dump Gate open Sequentially during 'Lift to Dump' Cycle.
    • Once the Collection Hopper reaches Full Height, the Gate Opens to Dump.
  • Powder Coated Paint!
  • These Pruning Shredders are Available to List in Two Narrower Working Widths, 48" & 55".
  • Mower Ships Complete Including a 540RPM PTO Shaft!
    • Video is of a Koala PRO 1600 Mower, but this Listing is for a Cobra Collina 1600 Mower.
SPECIFICATIONS:
  • Suitable for 70 to 100HP Tractors.
  • Suitable for Cat 2, 3-Point Hitches.
  • Hopper Capacity: 64 Cu'/2.4cu Yd's.
  • Working Width: 60".
  • Overall Width: 6'-8".
  • Overall Length: 102".
  • Overall Height: 67".
  • Electronically Balanced Rotor has 24 Hammer Style Blades.
    • Rotor & Blades are Rated to Cut to 5" Diameter Material.
  • Weight: 3527lb's (Less PTO Shaft, Pallet/Crating, etc.).
  • Specifications are based on manufacturer provided data & subject to change.

Share your knowledge of this product. Be the first to write a review »