Home > ALL PRODUCTS >

BULL 2200 FLAIL MOWER, MULCHER: 87" CUT, 24" HYD OFFSET & 24" SIDE TRIM CUTTER!
Peruzzo Bull 2200 87" Flail Mower, Mulcher w/Side Cutter


 


Availability: Usually Ships in 1 to 2 Weeks
Product Code: BULL2200WSIDECUTTER
 

Description
 

FLAIL MOWER GENERAL FEATURES:
  • This Peruzzo Flail Mower Has 20 Solid Cast Steel Hammer Blades - Peruzzo Flail Mowers always have the highest population of Blades to provide the best possible cut, and to reduce the burden on your tractor!
  • Peruzzo Mower Gearboxes include an Over-Running Clutch, which provides two advantages:
    • First, easy alignment & attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
      • The O.R. Clutch enables you to freely spin the pto shaft & gearbox for alignment!
    • Second, smooth shut Down:
      • The O.R. Clutch allows the Mower gearbox to free wheel to a stop, eliminating abrupt shutdowns!
  • 24" Right Side Hydraulically Offsetable Hitch, 'Adjustable On The Fly':
    • If you are Mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor alongside of the Fence or Building (and risk scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), you can simply keep the Offset part of the Mower close to the edges you want to mow and prevent any damage to the Tractor or the trees, fencing, walls, etc. Snagging posts, trees or other secured objects can also damage the 3-Point linkage on the Mower or even the pull arms & top link of your Tractor.
    • If the edge of any Mower is flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the Offset feature will provide that. It will also eliminate the need to look back over your shoulder to see the Mower Deck. A simple glance to your right gives you visibility of the outer mowing edge.
  • Rear Roller provides Mower Deck suspension & cutting height adjustment.
  • Flail Mowers provide a better cut than standard Rotary Mowers, plus with the Universal 'Solid Cast Hammer' Blades on this Flail Mower, you can cut up to 4" diameter material, and get a very good finish cut too. To get the best finish cut, the Hammer Blades must be as sharp as possible, which can be done with an angle grinder. To get the maximum cutting capacity of 4", your tractor will need to have the maximum recommended HP.
  • Flail Mowers Are The Safest Mowers Available:
    • The possibility of discharging dangerous projectiles is reduced dramatically!
  • Flail Mowers also are the easiest to handle on your Tractors 3-point. The much shorter length of the Mower Deck (compared to rotary mowers) significantly reduces the physical burden on your Tractor & 3-point, making mowing, handling, transport & storage much more stable & safer for any size Tractor, especially for compact & utility size Tractors!
  • Mower includes Skid Shoes & 540RPM PTO Shaft (not shown in photo).
SIDE TRIMMER GENERAL FEATURES:
  • The Peruzzo Side Trim Mower has 2 solid steel swinging Blades (attached to a pan carrier) to provide the best possible cut!
    • Blades are 5/15" thick x 3-1/8" wide x 8-3/4" long.
    • Blades are sharpenable & always in stock.
  • Rotary Head is shown extended in photo.
    • Outside edge/max reach of the Trimmer head from edge of Flail Mower Deck is about 20".
    • Trimmer Rotary Head has a protective bumper around the circumference to protect trees, posts, etc.
      • For additional protection, the Head will also rotate (upon contact) to prevent damage to the Head & fixed objects it contacts.
    • Rotary Head can be pitched about 50° left or right (on horizontal axis) to accommodate varied terrain.
    • Side Trim Mower requires 1 set of tractor hydraulic outlets for operation.
  • Side Trim Mower ships with Attaching Brackets, Hydraulic Hoses & Couplers.
FLAIL MOWER SPECIFICATIONS:
  • Rated for 70-90HP Tractors.
  • Suitable for Cat 2, 3-Point Hitches.
  • Mowing width is 87".
  • Overall width is 93".
  • Overall depth is about 48".
  • Electronically balanced Rotor has 20, Solid Cast Steel Hammer Blades.
    • Rotor & Blades are Rated to cut up to 4"-5" diameter material.
    • Heavy duty Cast Hammer Blades weigh 3.5lb's each!
  • Weighs 1507lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.
SIDE TRIMMER SPECIFICATIONS:
  • Mowing width is 24".
  • Mower Head speed is 2400RPM's.
  • Rotor & Blades are Rated to cut up to 2" diameter material.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Share your knowledge of this product. Be the first to write a review »