Home > ALL PRODUCTS >

BULL 1600 63" FLAIL MOWER, MULCHER, ORCHARDS, VINEYARDS: 12" OFFSET, CUT 4"DIA! DOUBLE HITCH & FEED THRU GEARBOX FOR FRONT & REAR 3-POINTS!
Bull 1600, 63" Offsetable Flail Mower


 


Availability: Usually Ships in 1 to 2 Weeks
Product Code: BULL1600
 

Description
 


GENERAL FEATURES:
  • The Bull Reversible Offers the Following Unique Advantages:
    • Feed Through Gearbox.
    • Double Hitch for Front & Rear 3-Point Mounting.
    • 3/16" Thick, Double Welded Skin.
  • This Peruzzo Flail Mower has 14 Large Solid Cast Steel Hammer Blades - Peruzzo Flail Mowers always have the highest population of Blades & Highest Rotor Speed to provide the best possible cut, and to reduce the burden on your tractor!
  • Single row of 'Under Deck Grating' works as counter Blades to ensure reducing larger clippings, and will reduce even the smaller ones.
  • Peruzzo Mower Gearboxes include an Over-Running Clutch, which provides two advantages:
    • First, easy alignment & attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
      • The O.R. Clutch enables you to freely spin the PTO Shaft & gearbox for alignment!
    • Second, smooth shut Down:
      • The O.R. Clutch allows the Mower gearbox to free wheel to a stop, eliminating abrupt shutdowns!
  • Feed thru Gearbox & Reversible 3-Point Hitch are standard features for front mounted mowing!
  • 12" Left or Right Side Hydraulically Offsetable Hitch.
  • Multiple Advantages of This Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
    • If you are Mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor along side of the Fence or Building (and risk scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), you can simply keep the Tractor on a straight path and maneuver the Mower in & out instead! This reduces the risk of scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc. Snagging posts, trees or other secured objects can also damage the 3-Point linkage on the Mower or even the pull arms & top link of your Tractor.
    • Much, Much better visibility: If the edge of any Mower is flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the Offset feature will provide that. With this Mowers Offset, visibility at the far end of the Mower head won't require that you make a twisted donut out of your body to see it and helps ensure a safe and accurate cut!
  • Hydraulic Offset positioning can be done On-The-Fly (left or right), with infinite positioning.
  • Rear Roller provides Mower Deck suspension & cutting height adjustment.
    • Height adjustment varies from 1/4" to 4-1/2".
  • Flail Mowers provide a better cut than standard Rotary Mowers, plus with the Universal 'Solid Cast Hammer' Blades on this Flail Mower, you can cut up to 4" diameter material, and get a very good finish cut too. To get the best finish cut, the Hammer Blades must be as sharp as possible, which can be done with an angle grinder. To get the maximum cutting capacity of 4", your tractor will need to have the maximum recommended HP.
  • Flail Mowers are the safest Mowers available:
    • The possibility of discharging dangerous projectiles is reduced dramatically!
  • Flail Mowers also are the easiest to handle on your Tractors 3-point. The much shorter length of the Mower Deck (compared to rotary mowers) significantly reduces the physical burden on your Tractor & 3-point, making mowing, handling, transport & storage much more stable & safer for any size Tractor, especially for compact & utility size Tractors.
    • The Video in this listing is for a Bull 2400 with Reversible Hitch, but this listing is for a Bull 1600.
  • Mower ships complete including a 540RPM PTO Shaft!
SPECIFICATIONS:
  • Rated for 50HP to 85HP Tractors.
  • Suitable for Cat 1 & 2, 3-Point Hitches.
  • Mowing width is 63".
  • Overall width is 69".
  • Overall depth is about 48".
  • Electronically Balanced Rotor has 14, Solid Cast Steel Hammer Blades.
    • Rotor & Blades are rated to cut up to 4" diameter material.
    • Heavy duty cast hammer Blades weigh about 3lb's each!
  • Weighs 847lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.

Share your knowledge of this product. Be the first to write a review »